Please notice:

There will be no sim card in this item package, we just will send in random as a gift, please understand!

Latest version MV730,With ACC Condition monitoring,Trailer alarm.

Click to buy.

 

 

NOTE:

​If you are in Turkey, please write a message to modify the imei number in the order, or contact us after placing the order, we can help you to modify the imei number.

If you can in Chile or Colombia,after you receive the product, you should register imei in your country as soon as possible, otherwise the device is not allowed to be used in your country.

Version issue

Easy to hide

MV720, looks like a relay, but is actually a locator.

About Network

GSM band:850/900/1800/1900Mhz;

Realtime Tracking

We can query the real-time location information of the device through the platform,

mobile app (Micodus) and SMS.

Tracking way:GPS+LBS+GLONASS

SMS command:G123456 or where

Remote control

We can remotely control our device, and when someone wants to steal a car, we can disconnect the oil circuit and circuit remotely.

About Cut Oil

When sending cut off oil command: 555;

the device will execute the oil cut command;

(When the speed exceeds 20km/h, this command will not be executed immediately.By supplying oil and cutting off the oil (2 seconds interval), the speed will slow down.

When the speed is less than 20km/h. The device will fully execute the fuel cut command.)

Operating Voltage 10-40v

Can be applied to a variety of cars;

Like:Car,motorcycle,truck,taxi,bus.

Geo-fence

By setting one or several specific areas (home, company), the device leaves or enters this area, we will receive an alarm message.

History Route Playback

We can check the history Route of the car through the mobile app or login

platform, you can query the data for 180 days!

Overspeed Alarm

This alarm works only under continuous positioning mode.

Vibration alarm

Mainly used for anti-theft of cars,

When we receive the alarm message, we need to check the car in time.

Cut wire alarm

When someone else wants to cut the device line, we can immediately receive an

alarm message to prevent theft.

Sleep Mode

Turning on this function, the device can go into sleep mode and then save the

car’s battery.

How to use

​

(I) opend the cover,Insert a NANO SIM card support GSM/GPRS network into the slot and make sure the chip side is up

(II)Connect cable follow the picture

(III) Set admin number by sending a SMS command to the SIM card inside device

For example: admin123456+86186******(+86186*****should be youe phone number)

(IV)Set APN: APN123456 CMNET（please use your local APN instead of CMNET，if you do not know the APN content,you should contact your SIM card supplier）

MV720 parameters

About cut off oil function:

Regarding the connection of the line, it is necessary to find a professional person to install, otherwise the oil cut function may not work.

1. The standard power supply of this device is 10V-50VDC, the red line is the positive pole of the power supply, and the black is the negative pole of the power supply; when installing a negative power pole, please select grounding or grounding separately, And do not share with other wires;

2.The oil shutoff control line (green / blue line) is connected to the oil pump line.

Off state:power line requires 12V.

When the oil cut function is not available, you need to check:

1. Whether your device uses gps positioning, if it is, after sending the fuel cut command, wait for a while, the device will respond to the command;

2. If your device gps has no signal, after sending the oil cut command,It takes at least 1 minute for the device to execute the command. Please wait a few minutes.

Product display

How to solve problems

Q: If the device start up fail

A:Check the cable connect right or not.

Q:If The device can not obtain location information

A:Place the unit at the open area to test

Q:How to chose the SIM card?

A:The SIM card need support GSM/GPRS and ensure that the card has enough currency and credit

Q:How to use in the foreign country？

A： Please set the APN befor use ,please edit the text “APN123456 CMNET” and send it to the SIM card of the device ,CMNET is Chinese operator’s APN, Replace the corresphonding APN when use in other country,APN detail can contact your SIM card carrier

Overview:

1. Hidden Design and Easy Installation

relay outlook design makes the device very convenient for hide and install2. Wide Operating Voltage 10-40V DC, compatible with vehicles on the market!

Once your vehicle was stolen or meet any emergency, you will can remotely cut off the fuel via SMS command or APP to stop the vehicle, of course you also can resume the fuel remotely.4. GPS+LBS Double Positioning Ways

If the gps signal is good, the device will locate via gps satellite, if not, the device will locate via LBS! Under GPS locating mode, the accuracy is 5-10 meters, under LBS locating mode, the accuracy is 100-1000 meters!5. Realtime Tracking

You will can realtime track the device on google maps via mobilephone, tablet and computer, and the minumum data upload interval is 10 seconds!6. History Route Playback

The APP and web server can record the upload data of the device up to 6 months, you will can playback the history route at any time!7. Power Saving Mode

The device will go into standby mode automatically when there isn’t vibration for 3 minutes , it will go into working mode when it detect vibration again8. Overspeed Alarm

This alarm works only under continuous positioning mode.When the unit speed is exceed the speed you presetted, it will send message ldquospeed alarm!rdquo to the admin number every 5 minutes.9. Shake Alarm

After you did the shake alarm setting,please keep the tracker being stationary for 5 minutes, then this function will start working. It will send SMS ldquosensor alarm!rdquo to the admin number when the unit get shocked.10. Movement Alarm

When the units stays immobile in a place for 10 minutes, the user can set up the movement alarm by this command “move+passord”, then in case the device moved 500m it will send alarm SMS “Move Alarm+Latitude and longitude” to the authorized number.11. Virtual Fence

Set up a virtual fence for the tracker to restrict its movements within a district. The unit will send alarm information to APP and web server when it goes out of or get in this district.12. Sleep Mode

After did this setting, if no shock for 5 minutes, the tracker will work under “sleep by shock” mode, GPS will shut off, GSM will works in low consumption. Vibration, SMS, call will can wake up the tracker.13. Illegal Cutting Line Alarm Under arm mode, if someone cut the wires of the device, you will can get alarm information from the device

14. LIFETIME FREE WEB TRACKING SOFTWARE AND MOBILE APP