FENVI WiFi6 AX1800 Wireless Repeater Dual Band 2.4G/5GHz 802.11AX Gigabit Wi-Fi 6 Extender Long Range Signal Expansion Booster

Description

FENVI WiFi 6 AX1800 Wireless Repeater Dual Band 2.4G/5GHz 802.11AX Gigabit Wireless Extender Wi-Fi6 Long Range Signal Expansion Booster

Product Features

– The next generation of Wi-Fi, leading 802.11ax standard, complies with IEEE 802.11 ax/ac/a/b/g/n standards.
– Dual band 2.4G 573Mbps + 5G 1201 Mbps with the aggregated speeds up to 1800Mbps.
– Gigabit Ethernet ports provide your devices high-speed network experience.
– With various modes, you can either use it as a regular extender/AP or pair it with a mesh device.
– The WiFi 6 MU-MIMO and OFDMA techniques have largely improved the device efficiency and performance.
– Build in a smart night light.
– Compact, wall plug design for convenient placement.

REMIND:

【Expand Your WiFi Range】: Wi-Fi range extender works for expanding WiFi signal of main router to further rooms, completely covers network dead zones with stronger signal, optimize your home wireless coverage.

Q&A

Q1. Can’t connect to internet after finished setting ?
A1. Please check whether you enter the same password as your router, and check is there any special characters in it, such as *&^%$#@!. If yes, please change your router password. Repeater can not identify special characters.

Q2. How to reset the repeater ?
A2. Please long press the reset button for 10 seconds under powered. ( NOT WPS button, the reset button is at the side)

Q3: What should I do if I cannot access the Repeater’ s web managementpage?
A1: Make sure your computer is connected to the extended network.
A2: Make sure your computer is set to obtain an IP address automatically.
A3; If the Repeater has connected to the router,you should go to your router’ sDHCP client list to obtain the Repeater’ s current IP address.
A4; Reset the Repeater.

Q4: Why does the wireless transmission rate speed down,when the wirelesssigna! is stronger after repeated by the Repeater?
Repeater has to process one-way communication between your root Wireless
A1: In compliance with the wireless transmission protocol,all the Repeater devicesare set to work in half-duplex instead of full-duplex mode.In other words,therouter(or AP) and the terminal clients; so the transmission time will be double-increased,while the speed will be decreased.Recommends that youconnect to the extender when your home network connection is poor ,or whenyou want a larger wireless coverage to eliminate’ dead zones”

Q5: Why the devices connected to the Repeater cannot get an IP addressfrom the Repeater and cannot access the Internet?
A1; Maybe you enabled a wireless for MAC filter ,wireless access control,or accesscontrol list(ACL) on your router. To solve this problem,please log into yourrouter and disable the for MAC filter,wireless access control or ACL.
A2; Maybe the Repeater has not been successfully connected to your router,please reset the Repeater and Reconfiguration.
A3;Maybe the IP address of the router is occupied or the wireless device connected by the router has reached the limit. please reboot your router,then reset the Repeater and Reconfiquration.